Landscaping & Tree Care Compliance Pack
Compliance pack for landscaping and tree care. Chainsaw safety, fall protection (climbing, aerial lift), wood chipper safety (mass casualty risk), electrical hazards (tree near power lines), heat illness, vehicle/equipment safety.
When this template is required
Landscaping and tree care face significant occupational hazards: chainsaw operation, work at height, electrical contact (tree near power lines), wood chipper feed-in (mass casualty risk), heat illness, ergonomic injuries, vehicle/equipment operation.
Why this template
Wood chipper feed-in — mass casualty risk
Wood chipper feed-in incidents (worker pulled into chipper) are catastrophic and have caused multiple worker fatalities. Wood Chipper Safety procedure addresses feed-in prevention, lockout during clearing, never reaching into the feed.
Electrical contact prevention
Tree work near power lines is a major fatality category. Workers and equipment must maintain Minimum Approach Distances (MAD) from energized lines. Pack addresses utility coordination, line clearance contractor qualification, MAD requirements.
ANSI Z133 alignment
ANSI Z133 is the consensus standard for arboricultural operations. Tree care contracts and insurance carriers increasingly require Z133 compliance. Pack crosswalks OSHA programs to Z133 requirements.
Climbing fall protection
Tree climbing requires fall protection unlike most construction — different anchor systems, dynamic loading, work positioning. Pack addresses both climbing and aerial lift fall protection.
What you receive
- Landscape / Tree Care Safety Program
- Chainsaw Safety Procedure
- Fall Protection for Tree Work (climbing + aerial lift)
- Wood Chipper Safety (feed-in prevention, lockout)
- Electrical Contact Procedure (tree near power lines)
- Heat Illness Prevention (multi-state)
- Vehicle and Trailer Safety (towing chippers, equipment)
- ANSI Z133 crosswalk
- PPE Hazard Assessment
- Annual training matrix
How you get it
This document is written and reviewed against the standard it cites, and it is ready now. The download link is emailed as soon as your payment clears.
Revisions included — if something about your operation changes what the document should say, reply to the delivery email and we will amend it.
Who buys this
- Tree care and arboriculture companies
- Landscape installation and maintenance
- Lawn care services
- Tree service / removal companies
- Municipal forestry / parks departments
- Utility line clearance contractors
Frequently asked
What's ANSI Z133?
ANSI Z133 — Safety Requirements for Arboricultural Operations. Consensus standard developed by tree care industry. Covers chainsaw operation, climbing, aerial lift, chipper, electrical, and other tree care hazards. Many tree care contracts require Z133 compliance; OSHA references Z133 in enforcement. Pack crosswalks programs to Z133.
What's the MAD for power lines?
Minimum Approach Distance — the distance workers and equipment must maintain from energized power lines. MAD depends on voltage. Examples: <50kV = 10 ft; 50-200kV = varies. Line clearance work (within MAD) requires qualified line clearance arborists. Most tree care companies are NOT qualified for line clearance — those branches require utility or qualified contractor.
Why is wood chipper safety such a focus?
Wood chipper feed-in incidents are among the most catastrophic landscaping fatalities. Worker pulled into the chipper feed almost always results in fatality. Prevention: never reach into feed; use push sticks for short material; ensure all parts cleared before clearing chipper; lockout during clearing. Pack addresses each control.
Does this cover lawn care equipment?
Yes — at a high level. Mowers, trimmers, blowers, and similar small equipment safety covered in the general Safety Program. For lawn-only operations, the pack may be more comprehensive than needed; for full-service landscaping with tree care, all elements apply.